Esko Kongsberg blades for cutting hard materials, plastics and cardboard.

Check out our wide range of knife blade replacements for cutting plastics and cardboard with a non-oscillating tool. All our blades are replacements of the highest quality.

---

The Esko Kongsberg machine with the CorruSpeed tool and replacement blades from the SR81xx series has been designed for high-speed cutting of plastics and corrugated cardboard without oscillation.

Single-sided (unidirectional) blades:

BLD-SR8124, BLD-SR8140, BLD-SR8160, BLD-SR8170, BLD-SR8171A, BLD-SR8172, BLD-SR8180, 

Double-sided blades (two-way):

BLD-DR8160, BLD-DR8180, BLD-DR8210A, BLD-DR8260A, BLD-DR8261A, BLD-DR8280A

---

Knife Esko Kongsberg BLD-SR8172 blade G42460402 Weldon fi 8mm. Maximum cutting thickness approx. 4.5 mm. 40′ cutting edge. Long-life tungsten carbide blade for thin flexible materials such as foldable cardboard, polyester film, leather, vinyl and paper.

---

Knife Esko Kongsberg BLD-SR8170 blade G42460394 fi 8mm. Long-lasting tungsten carbide blade for thinner, flexible materials such as foldable cardboard, polyester film, leather, vinyl and paper. Maximum cutting thickness approximately 6.5mm.

---

Knife Esko Kongsberg BLD-SR8160 blade G34094458 fi 8mm. Suitable blade for cutting rigid materials such as various sealing materials, Forex and solid cardboard.

---

Knife Esko Kongsberg BLD-SR8180 blade G34094466 fi 8 mm. A larger angle than SR8160 reduces the risk of blade breakage in hard materials, but provides a greater indentation in thicker materials.

---

Knife Esko Kongsberg BLD-SR8140 blade G42455899 fi 8mm. Good blade for cutting various materials with foam core. The jam value is 4 mm.

---

KnifeEsko Kongsberg BLD-SR8124blade G42450494 fi 8 mm. Good blade for cutting various corrugated plastic materials. The jam value is 4 mm.

---

Knife Esko Kongsberg BLD-SR8171A blade G424609568 fi 8mm. Designed for thinner, flexible and stiff materials such as solid cardboard, vinyl, plastics. Angle of attack 30*. Asymmetric knife blade that sweeps all burrs and debris to one side.

---

Knife Esko Kongsberg BLD-SR8173A blade G42460949 fi 8mm. Designed for thinner, flexible and stiff materials such as solid cardboard, vinyl, plastics. Angle of attack 40*. Asymmetric knife blade that sweeps all burrs and debris to one side.

---

KnifeEsko Kongsberg BLD-DR8160blade G42447235. Knife blade with 8 mm cylindrical shank. The angle is 2 times 30 degrees. It can cut materials up to approximately 5-6 mm thick. Good blade for cutting stiff materials such as various gasket materials, forex and solid cardboard.

---

Knife Esko Kongsberg BLD-DR8180 blade G42447284 fi 8mm. For cutting rigid materials such as various gasket materials, forex and solid cardboard. The angle is 2 times 40 degrees. Reduces the risk of blade breakage in hard materials, but increases the overcut in thicker materials.

---

KnifeEsko Kongsberg BLD-DR8210Ablade G42452235 fi 8mm with two 100 degree cutting edges. Made of special material with an asymmetric edge, optimized for a nice, burr-free cut on one side. Requires the ability to control the cutting direction. Good blade for cutting various plastic materials.

---

KnifeEsko Kongsberg BLD-DR8261Ablade G42462002 fi 8 mm. A special blade with an asymmetric edge ensures a nice cut, removing all burrs to one side. Requires control of the cutting direction. A good knife for cutting various plastic materials.

---

KnifeEsko Kongsberg BLD-DR8260AbladeG42461996fi 8mm made of tungsten carbide with an asymmetric edge. To get a nice cut, the blade moves all the burrs to one side. Requires control of the cutting direction. Good blade for various plastics. Sagittal blade tip: 0.5-1.0′

---

Esko Kongsberg BLD-DR8280A knife, blade G42452227 fi 8 mm with an asymmetric edge, optimized for a nice cut, pushing all burrs aside. Requires control of the cutting direction. Good blade for cutting various plastic materials.

---

TORO Technology
ul. Kolejowa 3
62-200 Gniezno
Polska
e-mail: sklep@toro-tec.pl
phone.: +48 603 965 003

---